Find Tile Cutting Services in Irvine, Kentucky
Give us a few details and we’ll match you with the right pro.
COMMONLY ASKED QUESTIONS ABOUT TILE CUTTING
Can I send my chosen tiles for cutting by an artisan?
Some expert tile installers also supply tile cutting as its own service. You could decide to find one who will take your tiles and measurements and cut them before you install them on your own. You may find this to be cost-efficient, but employing someone to handle both cutting and installation offers you more protection and time saving advantages.
Your local hardware and home improvement shops also provide tile cutting services, but they generally are not equipped and experienced in specialty cutting for intricate mosaics or difficult designs. If you do go to an artisan or home improvement shop able to cut your tiles, double-check you're providing the correct information and measurements so they'll fit properly when installed and your project goes off without a hitch.
What safety hazards and other information should I know when tile cutting?
Professional tile cutting services use specialized techniques for precision and efficiency to ensure accurate and clean results. The contractor or artisan you enlist will carefully consider the layout and vision you have for the project, the size and type of tiles you've selected, and the safety of anyone in the area before cutting. Here are some important factors that need to be thought about prior to and during the project:
- Tile Material, Size, and Thickness: Different kinds of tiles (ceramic, porcelain, glass, granite, etc.), and their size and thickness may require certain cutting equipment and techniques. There are several cutting tools available – as well as wet or dry cutting techniques – to deliver the desired results.
- Safety Measures: Adequate safety equipment, like safety goggles, gloves, and ear plugs, might be needed if the cutting tools used generate dust or debris. Wet cutting techniques are typically chosen for professional tile cutting services because they eliminate toxic crystalline silica (SiO2) dust from being expelled into the air.
- Layout and Marking: The desired layout of the installation needs to be fully understood prior to making any markings for cuts to ensure a clean and visually pleasing result. A contractor will usually double-check all your specifications and also factor in the grout and movement joints that will be used in your tile installation.
- Edge Finishing: Depending on the tile's ultimate position, it will need to have its edges smoothed following cutting using a sanding stone.
Which kind of equipment is needed to cut tiles?
The best technique to cut tiles depends on the design and tile type. For economical alternatives, handheld tile cutters are affordable but lack the strength needed for some projects. Manual cutters, costing anywhere from $50 to $900, are suitable for ceramic, but you may need a strong model to use on harder porcelain tiles. While using a manual cutter, press down firmly to score a line but avoid excessive pressure to prevent chipping. Running the blade on your marked lines and making sure it doesn't deviate from the course will also help you minimize chipping.
Wet table saws are one of the favored cutting devices among contractors because they are strong enough for use on hard materials like marble or granite. Wet table saws are pricey, but can be borrowed for around $200 per week. Another cutting device that could come in handy is a 4-inch angle grinder featuring a diamond blade. Angle grinders are suited for curved cuts, but keep in mind that they kick up significantly more toxic dust than other machines. A hole saw will be essential for cutting holes in tiles that will cover pipes where plumbing fixtures must be installed.
Why should I hire a certified tiler for cutting and installation?
Time and money are typically the primary concerns for homeowners renovating with tile, however, you could end up saving both when hiring a contractor to do the job for you. There is a lot of complexity to tile installation, and cutting is typically where homeowners attempting to do it themselves stumble the most. Not only will a professional tile installer have the certification and experience to ensure a smooth process, but they can guarantee good results without costly mistakes or unexpected delays.
A certified tile installer will come up with a solid plan for achieving your vision and know precisely how many tiles should be ordered so that you can stay within budget. Skilled installers will help you select the best tile material for your project and even offer knowledgeable advice on the layout and overall design.
When the work is ready to begin and your tiles are on site, they will need to be cut to ensure a clean and visually appealing finish. A big part of the complexity arises when factoring in things like corners and plumbing pipes that will need to protrude from the tiles. There are a variety of cutting tools and techniques, each made for distinct tile materials to deliver the desired aesthetic. Save yourself a lot of headaches and potentially having to fix costly mistakes by hiring a contractor experienced in these processes.
Vet Professionals Offering Tile Cutting Services Conveniently in Irvine, Kentucky
Tile offers a stunning look to many places around the home, but installing it will be confusing for the inexperienced and require some high-end tools. Tile cutting services from a pro near Irvine, Kentucky will eliminate the stress of one of the most challenging aspects of this home improvement project. A professional offering tile cutting services will already have the pricey cutting equipment needed to make simple cuts or even complex patterns and mosaics in ceramic, porcelain, and marble.
Looking for a dependable tile cutting service can be economical if you wish to install them yourself but don't want to buy pricey manual or waterjet cutting devices. You'll have to make sure you provide the tile artisan the correct measurements for cutting to ensure an aesthetically pleasing finish when installing them yourself, or you can enlist someone to do the entire project for you -- an option that delivers more protection and time-saving advantages.
There are many kinds of cutting machines, from the small handheld units to specialized waterjet devices. Handheld models are difficult to use on anything but ceramic material, while a wet table saw will be effective on tough porcelain or even some natural stones. Waterjet cutting machines are advanced tools that can do everything from cutting straight and rounded edges to complex mosaics and patterns. Waterjets are also ideal when cutting rigid materials like granite. You might want to hire a professional tile installer who already possesses these advanced cutting tools to give the best results and save money by not purchasing or renting the devices yourself.
You should know the right questions to ask regardless if you're searching for tile cutting services while planning on doing the installation yourself or want to hire a pro to take care of it all. Considering contractors who are certified tile installers will provide you confidence that the finished project will feature the look and longevity you desired. You can conveniently browse contractors around Irvine, Kentucky offering tile cutting services that suit your timeline and budget, as well as their certifications, client reviews, and more on Thumbtack.